Configuring Management IP Address via Equallogic CLI

Scenario: I installed a new EQL but didn't want to physically connect into the ISCSI network to configure the management IP addressing. An alternative is to use the CLI to configure the settings: Resolution: 1) Console to the EQL 2) Select the member you'd like to configure dr-eqlgrp01> member select dr-eql0 3)  Activate the Mangement NIC. Read More…

Reset Equallogic Password via CLI

Scenario: I wanted to re-delpoy a standalone Equallogic 6210X but had neither the password or even the IP address of the device Resolution: Steps  1) Console on the Equallogic and powercycle the device 2) Press CTRL+P on boot 3) Use the following commands: EQL> setenv RESETPASSWORD 1 EQL> reload This should reset the password back to Read More…